Monday, October 31, 2016

Migrating in Phoenix

Phoenix Migration

This is part of the series on Phoenix, taking you from noob to !noob. Here are the list of posts so far:
  1. Intro
  2. Scaffolding

Today we will look at the migration file that's produced from the scaffolding we performed last time.

Migration File

defmodule PhoenixLibrary.Repo.Migrations.CreateBook do
  use Ecto.Migration

  def change do
    create table(:books) do
      add :title, :string
      add :author, :string
      add :description, :text



At the end of generating the scaffold, we created the file above - priv/repo/migrations/20161014160805_create_book.exs. We are going to take a quick look at it and figure out what it's doing.

In the Rails world, we would have gotten a file like this:

class CreateBooks < ActiveRecord::Migration[5.0]
  def change
    create_table :books do |t|
      t.string :title
      t.string :author
      t.text :description


What's great is that the same basic thing that we are doing in Rails we are doing in Phoenix. In the Rails version we are creating a class to capture us creating a new books table and in the Phoenix version, we aren't creating a class, but instead creating a module.

In the Rails world, we are extending from ActiveRecord, but in Phoenix we are using helpers from Ecto.Migration. The important method that we are defining is the `change` method. This allows us to go forwards or backwards in our migration, to either create or tear down the table.

# Rails is rake db:migrate
mix ecto.migrate         # Runs migrations up on a repo

# Rails is rake db:rollback
mix ecto.rollback        # Reverts migrations down on a repo

The change method in both worlds take two arguments, a symbol representing the table we are going to create and a block where we create the actual columns in the table. In Rails we get a helper object that we can use to call functions where as in Phoenix we don't have/need a helper and can just call the add function passing in the name of the column and the type. And of course in Phoenix we call the timestamps function to create the created_at and updated_at column. But, in Rails we call the timestamps method on the helper.

In the future, we will dig into the models that are created from the scaffold command.

Friday, October 21, 2016

Phoenix Scaffolding

Phoenix, Let's Build

Welcome to the second installment of our Phoenix walkthrough. Last time we set up Phoenix, our database and saw our default 'Welcome' page for our dummy library application.

This week we will use some more generators and create our first model, views, and controller. Since this will be a library application, the most obvious choice of our first model should be a `book`.

Generate Scaffold

# mix [generator name] [model name] [table name] [attribute name : attribute type]
mix phoenix.gen.html Book books title:string author:string description:text

# in rails we do
#   rails generate scaffold Book title:string author:string description:text

There are a few key differences between the two, although they are very similar:

  • mix: it's the rake/rails of the elixir world.
  • phoenix.gen.html: this is the generator to use. remember that generators are just ordinary elixir scripts. also notice the `html` suffix which uses the script to generate html (as opposed to json -> phoenix.gen.json).
  • Book: this is the model name. notice the upper case. all models are uppercased.
  • books: this is an interesting distinction vs the rails world. WE NAME THE TABLE OURSELVES.
    in rails the name of the table is automatically made to be the pluralized name of the model, like Book (model name) -> books (table name).
    but English is a quirky language and you cannot always just add `s` to the end of the word, like child to children. so there is some complication in how rails needs to figure out to pluralize you model name.
    this is the first example of some bloat that Phoenix does away with, instead of trying to figure out how to pluralize your model name, Phoenix just defers to you, the developer, to name the table.
  • attributes: this is exactly the same as rails. except in Phoenix, if we omit the type, it defaults to `string`.

➜  phoenix_library git:(master) mix phoenix.gen.html Book books title author description:text

* creating web/controllers/book_controller.ex
* creating web/templates/book/edit.html.eex
* creating web/templates/book/form.html.eex
* creating web/templates/book/index.html.eex
* creating web/templates/book/new.html.eex
* creating web/templates/book/show.html.eex
* creating web/views/book_view.ex
* creating test/controllers/book_controller_test.exs
* creating web/models/book.ex
* creating test/models/book_test.exs
* creating priv/repo/migrations/20161014160805_create_book.exs

Add the resource to your browser scope in web/router.ex:

    resources "/books", BookController

Remember to update your repository by running migrations:

    $ mix ecto.migrate

Look at all the nice things that are generated. This is very similar to scaffold generation. You can see theres:

  • controller: book_controller
  • templates: index, show, new, edit, form
  • views: book_view
  • model: book
  • tests: book_controller, book
  • migration
We will eventually tackle them all, but not right now. Let's go ahead and follow the prompts. Open up web/router.ex and add in the new route to our books resource. Notice this distinction from Rails also. In Rails, this is done for you.

  scope "/", PhoenixLibrary do
    pipe_through :browser # Use the default browser stack

    get "/", PageController, :index

    # added this line here
    resources "/books", BookController

Next run `rake db:migrate`...I mean `mix ecto.migrate`. :)

➜  phoenix_library git:(master) ✗ mix ecto.migrate
Compiling 9 files (.ex)
Generated phoenix_library app

04:42:58.436 [info]  == Running PhoenixLibrary.Repo.Migrations.CreateBook.change/0 forward

04:42:58.436 [info]  create table books

04:42:58.456 [info]  == Migrated in 0.0s

Now start the server and check out your changes!

➜  phoenix_library git:(master) ✗ mix phoenix.server
Compiling 8 files (.ex)
[info] Running PhoenixLibrary.Endpoint with Cowboy using http://localhost:4000
21 Oct 04:46:52 - info: compiled 6 files into 2 files, copied 3 in 2.1 sec

Don't forget to hit the new route -> http://localhost:4000/books. Alright, that's it for now. Next time we'll talk about the model and migration.

Friday, October 7, 2016

The Rise of the Phoenix

Phoenix For the Rails People

I've been doing Rails for a long while now. Before Rails I was doing Enterprise Java but then my mentor at the time showed me this cool framework that took convention over configuration seriously and allowed really powerful things to be built quickly and easily. I was amazed and have been using tools like this ever since.

But the big argument against Rails is that it doesn't scale and is a bit bloated. Also there is a bit of a shift towards using more functional approaches. Enter my fascination with Elixir and Phoenix.

The next series of posts will be all about me learning Phoenix, but with a slant towards comparing and contrasting it against Rails. So strap in and take the journey with me.

I learn by doing, so I'll be building my normal 'hello world' type application, which is a library application. I used to spend a lot of time in libraries as a kid so I think thats the reason my default application is usually an application to track and catalog books. So let's get started.


Before getting started, you will need to install a few things. I'll assume you are on mac and have homebrew installed. First is postgres.

brew update
brew install postgres
createuser -P -s -e root
# then setup your root user or whatever you want your user to be called

Next install Elixir and mix.

brew install elixir 
mix local.hex

Now install Phoenix.

mix archive.install

Now we are ready to start building our app.

New Application

We will start first by creating the application. In rails we'd do something like:

rails new rails_library --database=postgresql

but in Phoenix we do:

mix phoenix_library

First thing to note here is `mix`, which is Elixir's build tool. Already a little different than the rails command. Also notice we run `` which really is nothing more than just a script that we run with mix. Lastly we pass it the name of the new project. Also notice that postgres is the default, so we don't have to tell it that we will be using it.

This command created a bunch of folders full of stuff, which we will get to as we need....which is right now. :) Open up the `dev.exs` file in the config dir and modify it as necessary to use the correct username and password to connect to your locally running postgres instance. Go ahead and do that for the `test.exs` file as well.

With that done, we can set up your db schemas by running:

mix ecto.create

# in rails we would do `rake db:create`

Very similar to rails, but instead of the rake command we use our Elixir build tool called mix, and we run the ecto.create script. Ecto is the database wrapper, so we will be seeing `Ecto` a lot.

The last thing we will do in our very gentle intro is to start the Phoenix server.

mix phoenix.server

# in rails we would do `rails server`

Then navigate to localhost:4000 and you will see the dummy page.

Next time we will be creating some models, views, and controllers. Until then!

Thursday, September 29, 2016

Elixir Destructuring

Break it all apart

Welcome to the fourth installment of our work with Strings. As usual here's a reminder of the original problem we were trying to solve:

take_prefix.("Mr. John", "Mr. ")
# returns 'John'

We want to be able to chop off some prefix and return the suffix of a string.

So far we've come up with three implementations, each one improving upon each other. Our initial implementation:

# slow bc of multiple String.lengths
take_prefix = fn full, prefix ->
  base = String.length(prefix)
  String.slice(full, base, String.length(full) - base)

IO.puts take_prefix.("Mr. John", "Mr. ")

The second implementation used ranges:

# replace one of our slow length call with a range
take_prefix = fn full, prefix ->
  base = String.length(prefix)
  String.slice(full, base..-1)

IO.puts take_prefix.("Mr. John", "Mr. ")

The third implementation used binary functions due to their constant speed regardless of the size of the given string.

take_prefix = fn full, prefix ->
  base = byte_size(prefix)
  binary_part(full, base, byte_size(full) - base)

IO.puts take_prefix.("Mr. John", "Mr. ")

The final improvement is really more aesthetics. We can make this solution a bit more functional and feel more Elixir-y by using a concept known as destructuring.

Destructuring is a way of taking a complicated data structure and breaking it apart into simplier components. Quick example:

[a, b, c] = [1, 2, 3]
# a now has the value 1
# b now has the value 2
# c now has the value 3

In this example, we took the array holding three numbers and broke it apart into it's separate elements. This is destructuring in a nutshell. Taking something and breaking it apart.

Here's another example using tuples (a data structure holding elements that are contiguous in memory).

{status, status_message} = {:ok, "Success"}

Sometimes our complex object that we want to break apart has information we don't care about. You might think you could do something like this:

# this will not work!
{status, status_message} = {:ok, "Success", "Junk"}
#** (MatchError) no match of right hand side value: {:ok, "Success", "Junk"}

Elixir thinks you messed up, so you have to be very explicit in telling it that you don't care about the last match. You do this by using an underscore.

{status, status_message, _} = {:ok, "Success", "Junk"}

Now this will work. Alright, I think we have all the tools we need to understand the final solution.

take_prefix = fn full, prefix ->
  base = byte_size(prefix)
  # this is the destructuring
  <<_::binary-size(base), rest::binary>> = full

IO.puts take_prefix.("Mr. John", "Mr. ")

Here we are destructuring the full string into two binary components. The << and >> signify that this is a binary data structure, in this case with two elements. The first element will contain a binary string that is the binary size of the prefix and the second element is the rest of the string. Let's get into a bit more detail.

Remember what we saw last week, a String is just a binary string in disguise. So what we are doing here is figuring out the number of bytes used in the prefix (so we know how much to chop off). Then we destructure the full string into two binary parts. The first binary part is the number of bytes that we calculated before (but now represented as the size in binary due to us wanting to destructure this into a binary data structure). And the second part is the actual string that we want to return, represented as a binary data structure. But as we saw last week, a String is just a UTF-8 encoded binary so returning this is just fine.

Destructuring is a powerful technique and is very useful in producing short and concise code. Elixir is not the only language that has this feature. ECMAScript 2016 has it as well.

With that, this concludes our multi-post demonstration on a simple problem I found from the Elixir docs, and how they were able to iterate through a few solutions until the settled on their favorite implementation. I felt like their explanation didn't go into enough detail, which is why we've been looking at each a bit more closely these past few weeks. Hopefully you learned something and had fun while doing it.

Next week, we'll discover and discuss a new topic that I haven't yet decided on yet :)

Tuesday, September 20, 2016

Getting Faster By Going Deeper

Elixir Code Points

This week is the third installment of our look at Strings. As a quick reminder, we tried to implement a function that chops off a prefix from a string.

take_prefix.("Mr. John", "Mr. ")
# returns 'John'

So far we've come up with two implementations, the second improving on the first. Our initial implementation:

# slow bc of multiple String.lengths
take_prefix = fn full, prefix ->
  base = String.length(prefix)
  String.slice(full, base, String.length(full) - base)

IO.puts take_prefix.("Mr. John", "Mr. ")

The second implementation used ranges:

# replace one of our slow length call with a range
take_prefix = fn full, prefix ->
  base = String.length(prefix)
  String.slice(full, base..-1)

IO.puts take_prefix.("Mr. John", "Mr. ")

The next improvement is to not even use String functions at all! Wait, what? How can you do that? What would you use??

To answer this, we have to see how Strings are represented. Everything in computers essentially boil down to 0's and 1's; we call these bits. If you put 8 of these together, you get a byte. With 8 bits put together, and each digit representing 2^n, where n is the number of positions from the far right, you can represent 0 to 255. So with 255 numbers, you just represent each letter with a number. For example, we use the number 97 to represent the small letter `a`. Another way to say this is that the small letter `a` has code point 97. This mapping is called the character encoding and Elixir uses UTF-8.

Problem is we have more than 255 characters that we want to represent, like letters with accent marks, or non-latin characters like Chinese. This means we need more numbers, which means we need more bytes. Let's look at an example using iex, the interactive elixir repl.

# `?` shows us the code point
iex> ?a

iex> ?ł

The small `a` is less than 255, which means we only need one byte to represent it. But the letter `ł` is over 255, and actually will require 2 bytes to represent 322. We can check double check this to see we are right.

iex> byte_size("a") 

iex> byte_size("ł") 

We can go even further and force Elixir to spit out it's binary representation by using a trick where we concatenate a null byte `<<0>>` to the string.

iex> "a" <> <<0>>
<<97, 0>>

iex> "ł" <> <<0>>
<<197, 130, 0>>

iex> "ał" <> <<0>>
<<97, 197, 130, 0>>

We can see that the small letter `a` only needs one byte to show 97, but `ł` needs more than one byte. So Elixir splits up the 2 bytes into two different and separate bytes and then represents each byte with it's own number. This is why we get 197 and 130 to show the 322 that really is the letter `ł`.

All this that we covered is really just to say that any letter will always be between 1 to 4 COMPLETE bytes. Elixir will never use a fraction of a byte to represent a letter. We can take advantage of this and use Elixir byte functions, which are WAY faster than Elixir String functions.

There is one more caveat, we have to make absolutely sure that whatever byte functions we use, we never chop in between code points. We don't want to chop `ł` into two separate bytes because then it won't be `ł` anymore, you need both bytes to represent this letter. Let's see our new solution:

take_prefix = fn full, prefix ->
  base = byte_size(prefix)
  binary_part(full, base, byte_size(full) - base)

IO.puts take_prefix.("Mr. John", "Mr. ")

Instead of `String.length` we used `byte_size`. The `String.length` function as you recall gets more expensive the longer the string is, but the latter `byte_size` always runs in constant time, regardless of the input size. This is great! Similar improvements are also gained by using `binary_part` instead of `String.slice`.

This is a good example of how understanding how something works under the covers allows you to employ some neat tricks. This is a valuable bit of insight that you will see often and should employ yourself. Whenever possible, think about replacing String functions with low level byte functions, you will get nice performance gains.

Next week we will use perform our final enhancement to this solution and wrap up our series on Elixir Strings.

Tuesday, September 13, 2016

Home Home on the Elixir Range

Elixir Ranges

Last week we were digging around the Elixir docs and had some fun with strings. As a reminder, we tried to implement a function that chops off a prefix from a string. Something like this:

take_prefix.("Mr. John", "Mr. ")
# returns 'John'

We saw our initial implementation:

take_prefix = fn full, prefix ->
  base = String.length(prefix)
  String.slice(full, base, String.length(full) - base)

IO.puts take_prefix.("Mr. John", "Mr. ")

But one big problem were the multiple calls to


which as we saw last week, does a full traversal of the string. As per the Elixir docs, the first improvement they perform is replacing

String.slice(full, base, String.length(full) - base)


String.slice(full, base..-1)

Let's look at this a bit. What are those dots in the second argument? This is something called a range. From the docs, a range is:

A range represents a discrete number of values 
where the first and last values are integers.

Ranges can be either increasing (first <= last)
or decreasing (first > last). Ranges are also always inclusive.

Let's take an example to help illustrate this:

range = 1..5

The `range` variable holds 5 numbers (1, 2, 3, 4, 5). That's it! It's just a collection of sequential numbers. Now let's check the docs on the new slice method:

slice(string, range)

#Returns a substring from the offset given by the
#start of the range to the offset given by the end
#of the range

So our call to slice

# As we saw last week, base is 4
# base = String.length(prefix)
String.slice(full, base..-1)

really is:

String.slice("Mr. John", 4..-1)

This function takes the string starting at the 4th letter and goes to the first letter counting backwards.

To say this another way, it's saying to take the string starting from the 4th letter up to and including the last letter.

Again, the advantage of using the range is that we save having to do the `String.length` call in the Slice method that we did last week.

Ranges are fun and come in quite handy. One more quick example with Ranges

println = fn x ->
  IO.puts x

Enum.each 1..5, println
Enum.each [1, 2, 3, 4, 5], println

Both of the last two lines will print out the numbers 1 through 5. The first one does so using a range and the second one uses a list of numbers.

That's it this week on the second improvement to our `take_prefix` method. Next week we will look at the next improvement that we can make to this method. As a teaser, it will involve us knowing how strings are represented. Until then!

Tuesday, September 6, 2016

Elixir Prefix by Suffix

Elixir Strings

I was reading through the Elixir docs and found some interesting code snippets in the `String` section. The example was how we could implement a function that returns the ending of a string.

So in other words, we want a function like this:

take_prefix.("Mr. John", "Mr. ")
# returns 'John'

The docs actually show a few solutions, gradually iterating on each, improving it slowly. I really liked how they did it, but thought that each solution could use a bit more detail.

This post will take the first naive solution and talk about it. This solution is probably the most intuitive, so is a nice way to ease into Elixir strings.


take_prefix = fn full, prefix ->
  base = String.length(prefix)
  String.slice(full, base, String.length(full) - base)

IO.puts take_prefix.("Mr. John", "Mr. ")

Let's jump right in.

First line

take_prefix = fn full, prefix ->

The first line declares the function. We want a function that takes in two parameters, the full/entire string, and the prefix that we want chopped off.

Second line

base = String.length(prefix)

This line figures out how long the prefix string is. There is something to note here, and that this function `String.length` needs to traverse the entire string in order to figure out it's length. The reason for this is that some letters are made up of two characters, but are perceived by humans as one.

One example is this letter:

# é
iex> String.codepoints("é")
["e", "́"]

Two characters used to represent one. So the `String.length` function has no choice but to traverse the entire string to check for weird conditions like this. As a result, as the string gets longer, this function call takes longer to complete as it has more characters to check.

Third line

String.slice(full, base, String.length(full) - base)

The next line is a bit compact, but let's dig in and see if we can't unpack it.

Let's start inside and go out.

String.length(full) - base

We saw the first part before. But now we are taking the length of the full/entire string. And from that we are subtracting out the length of the prefix.

So from our example, the length of our full string is ("Mr. John") is 8, and the length of the prefix ("Mr.  ") is 4. Simple subtraction (8-4) and we have 4.

Our call really then is:

String.slice(full, 4, 4)

Looking up the docs for that:

slice(string, start, len)
Returns a substring starting at the offset start, and of length len

In plain English, this method says, "take the string Mr. John and starting at the 4th element (0 based), give me back a string 4 characters long".

Fourth line

IO.puts take_prefix.("Mr. John", "Mr. ")

And the last line shows the invocation of the method and the write to the console.

Tada. But as you may have noticed, this method is expensive, mainly due to the two length calls we have. And then we have an additional slice call that has to yet again traverse the string in order to give us the substring. For short strings, this solution is no problem. But when you get longer strings, this method will not be so great. There are ways we can improve on this, which we will take a look at next time.

Monday, August 29, 2016

First Sip of Elixir and Beer

Trying out Elixir

I've always been meaning to try out some Elixir but wasn't until I chatted a bit with José Valim about it until my curiosity was really piqued. I love the idea of embracing failure and not worry about catching and trying to handle exceptional cases. After all, this is what exceptions are, exceptional things. Just let the process die and rely on the framework to spin another one up. Beautiful! Additionally, add in the fact that it's a functional language, really makes it shine. Pattern matching and data transformation are so nice. Today I'll talk a bit about how to get started with Elixir and a bit about building a command line program. I chose to solve the "99 bottles of beer" problem, which is essentially just to print out the lyrics to the 99 bottles of beer song.

First installation of Elixir and project setup.

  # install Elixir, mac specific instructions
  brew install Elixir
  # create a new project, I named it elixir_99_bottles
  mix new elixir_99_bottles

Now a bit of setup to turn this into a command line tool. First open up mix.exs.

# A defmodule is sort of like a `class` in the object oriented world.
# But since this is a functional language, this is really more like a
# collection of related functions.
defmodule Elixir99Bottles.Mixfile do
  use Mix.Project

  # add the escript line.  
  # this tells elixir that this is a command line tool.
  # and that to invoke it, the escript_config method must be called
  def project do
    [app: :elixir_99_bottles,
     version: "0.1.0",
     elixir: "~> 1.3",
     build_embedded: Mix.env == :prod,
     start_permanent: Mix.env == :prod,
     escript: escript_config,
     deps: deps()]


  # Notice that it's defp - meaning its a private function.
  # Compare that with def, which means a public function.
  defp escript_config do
    [main_module: Elixir99Bottles]


Next bit of magic, go to lib/elixir_99_bottles.ex. Here you need to add a special main method that will serve as the entry point.

defmodule Elixir99Bottles do

  # entry point
  def main(args) do
    # args is a list, so we grab the first element and "set" that into string_val
    # if there are no args, we set string_val to 99
    string_val = List.first(args) || "99"

    # we want an integer, so we parse it.
    # the return is actually a tuple, which is a nice set of numbers.  
    # kind of like how x and y coordinates on a map make a nice tuple.
    # a tuple is a finite list of things that all logically belong together
    # the return tuple here is actually the { parsed integer, remained after parsing }.
    # but since we are using base 10, all our integers will parse nicely
    # `start` will be set to the parsed integer
    {start, _} = Integer.parse(string_val)

    # loop over the entered `start` value down to 1, i will be the iterator
    for i <- start..1
        IO.puts format i
  # when the num argument is 1, call this function and return this interpolated string
  defp format(num) when num == 1 do
    line_one = "#{num} bottle of beer on the wall, #{num} bottle of beer.\n"
    line_two = "Go to the store and buy some more, 99 bottles of beer on the wall."
    line_one <> line_two

  # when the num argument is more than 1, call this function and return this interpolated string
  defp format(num) when num > 1 do
    line_one = "#{num} bottles of beer on the wall, #{num} bottles of beer.\n"
    line_two = "Take one down and pass it around, #{num-1} bottles of beer on the wall.\n"
    line_one <> line_two


Now lastly we add some tests. Open up test/elixir_99_bottles_test.exs.

defmodule Elixir99BottlesTest do
  use ExUnit.Case
  doctest Elixir99Bottles

  # this import allows us to capture and compare things printed to standard out
  import ExUnit.CaptureIO

  # first test is when we have an input of 1.
  # notice we call our class with a list of "1" and compare that with our output
  # """ -> this is a heredoc where you can create multiline strings.  
  # """ starts and ends the multiline string.
  test "1 line" do
    assert capture_io(fn ->
    end) == """
    1 bottle of beer on the wall, 1 bottle of beer.
    Go to the store and buy some more, 99 bottles of beer on the wall.

  # first test is when we have an input of 2.
  # notice we call our class with a list of "2" and compare that with our output
  test "more than 1 line" do
    assert capture_io(fn ->
    end) == """
    2 bottles of beer on the wall, 2 bottles of beer.
    Take one down and pass it around, 1 bottles of beer on the wall.\n
    1 bottle of beer on the wall, 1 bottle of beer.
    Go to the store and buy some more, 99 bottles of beer on the wall.

Now, time to run it all!

  # compile the code

  # run it.  defaults to 99

  # run it for 50 beers
  ./elixir_99_bottles 50

  # run the tests
  mix test

Boom! A very simple demonstration of using mix to create an Elixir project complete with tests. Check out the code here:

Monday, March 28, 2016

Syntax Highlighting

Blog Enhancements

I've been rocking Alex Gorbatchev's syntax highlighter for a while on this blog, and it I really liked it.  It was quick and easy to use and at the time but lately, and for the past few years, I've really been into darker themes.  The syntax highlighter didn't appeal to me anymore and I didn't particularly like the themes they had.  So I searched around and stumbled upon Prism.  I like the way Prism looks and I found the installation super simple.  Take a look below at a code sample:

  var bubbleSort = function(unsorted) {
    for (var i = 0; i < unsorted.length; i++) {
      var swapped = false;
      for (var j = i + 1; j < unsorted.length; j++) {
        if (unsorted[i] > unsorted[j]) {
          var tmp = unsorted[j];
          unsorted[j] = unsorted[i];
          unsorted[i] = tmp;

          swapped = true;
      if (!swapped) {
        return unsorted;
    return unsorted;
If you too want syntax highlighting like this, this is how!


  1. Include the theme stylesheet
            <link href="" rel="stylesheet" type="text/css"></link>
  2. Include the prism javascript file and all the languages you want highlighted, say you wanted support for ruby
            <script src=""></script>
            <script src=""></script>
  3. Wrap your code that you want highlighted
      <pre><code class="language-ruby">
        puts 'hi' 
  4. Done! You should get something like the following:
        puts 'hi'


For more information, definitely check out their site
And once you find the theme you like and language you want highlighted, stop over here for a nice cdn that will serve up the javascript and css's that you need

Monday, March 21, 2016

Arrow Functions

I love the new arrow function in EcmaScript 6.  I use it for everything, pretty much all the time :)

Quick Rundown

Basic Form

var add = (numberOne, numberTwo) => {
  return numberOne + numberTwo;
add(1, 2);
//returns 3

Here I'm creating a function named add that takes two parameters, numberOne and numberTwo.  This function will return the two numbers added together.  When the body of the function is a single expression, we can write this even more concisely.

var add = (numberOne, numberTwo) => numberOne + numberTwo;

At first glance, this looks just like a different syntax for creating a function.  But there's more to it than that.  Inside of the arrow function, there is no new 'this' pointer defined.

Let's look at an example (taken from MSDN:

function Person() {
  var self = this; // Some choose `that` instead of `self`.
                   // Choose one and be consistent.
  self.age = 0;

  setInterval(function growUp() {
    // The callback refers to the `self` variable of which
    // the value is the expected object.
  }, 1000);

Notice the strange self variable we had to create in order to access age.  This is because the function growUp gets a brand new 'this' pointer that is quite different than the 'this' pointer inside of Person.  That means that when growUp is called, calling this.age will not work, because there is no 'age' variable inside of the growUp function.  The new fat arrow fixes this:

function Person(){
  this.age = 0;

  setInterval(() => {
    this.age++; // |this| properly refers to the person object
  }, 1000);

Notice that 'this' can correctly find and use the age variable.  This is very nice and just feels much better overall.


1.  Returning an object literal needs to be wrapped in parens.

const gimmeFoo = () => {  foo: 1  };
//will not work!  calling gimmeFoo() returns undefined

instead do this:

const gimmeFoo = () => ({  foo: 1  }); 

2.  You also cannot override the 'this' inside of an arrow function.  That means that bind is useless here, so don't try it.  Same thing for call and apply.  You can still pass in arguments, but you cannot override 'this'.

3.  You also don't have access to the 'arguments' variable, but a good workaround is to use rest parameters (, which we won't cover here.

var f = (...args) => args[0];

4.  Even if you don't have arguments, you still need the parens:

const gimmeHi = () => 'hi';

but you can also do this:

const gimmeHi = _ => 'hi';
That's pretty much it! Go forth and start using it :)

Monday, March 14, 2016

A Docker Movie - Starring Chris Pratt

Ships Ahoy

Lately I've been mucking around with a lot of Docker.  If you are unfamiliar, Docker provides a new approach to deploying software.  Prior to Docker, you had to install all of the libs and dependencies yourself manually on the target machine. But with Docker, you assemble containers that together all make up your application.

Think of it like Lego blocks.  You have a block for, let's say Ruby.  And you have a Lego block for Rails, and another Lego block for your database, say Postgres.  And you put all these blocks together and you have your entire app.  So you don't think of installing servers and language runtimes, you instead think of deploying containers (Lego blocks) that all work with each other.  I would imagine that Chris Pratt could play Ruby in this particular movie.  From the Docker website:

"Docker containers wrap up a piece of software in a complete filesystem that contains everything it needs to run: code, runtime, system tools, system libraries – anything you can install on a server. This guarantees that it will always run the same, regardless of the environment it is running in."

A Docker container for Ruby is completely self contained and works by itself.  A Docker container for a Postgres database is completely self contained and works by itself.  Or you could have them both running at the same time and poof they can work together.  And a Docker container is super easy to run.  You simply pull down the image of a container from a repository (typically DockerHub), then run it.  Done.

Let's take a very simple example.  I've been working recently with a design team that was building a prototype with static html, css and javascript.  They had all their code locally and was zipping them up to me so I could open them up on my computer and view them.  But this process was slow and it was very manual.  No one could see the code except whoever they sent the zip to and I always had to bother them for the latest stuff.  I wanted to be less turtle and more cat with my process.

My first thought was to standup an sftp server somewhere that they could copy files to that would then be served up by nginx or something.  That approach is fine but required me to setup an sftp server and nginx and then configure both.  It also required the design team to periodically upload the files so that I could view them.  Things still felt very manual, and I was feeling lazy.  If you guessed my ultimate solution involved Docker, you are correct :)  The instructions below assume you have docker installed already.  I am running ubuntu and the instructions for setting Docker up are great (



1.  Download the nginx image from DockerHub and install it locally.
docker pull nginx

2.  Run the image
docker run --name prototype /usr/local/code:/usr/share/nginx/html:ro -d -p 8081:80 --restart=unless-stopped -v nginx

There's a lot here, so I'm going to break down the arguments a bit:
Option Explanation
docker run runs the nginx image that we pulled down from DockerHub
--name prototype this is what I named my container.  This makes it easy to start and stop the container bc I can reference it using this name, 'prototype'
-v /usr/local/code:/usr/share/nginx/html:ro this mounts a volume from the host machine (my ubuntu aws instance) and makes it available to nginx.  So the nginx docker container will see /usr/share/nginx/html, but on my real ubuntu machine, it's actually /usr/local/code.  The last bit 'ro' means that docker cannot write to the volume (read only).  One last gotcha, make sure that the docker group can read /usr/local/code on the host ubuntu machine or you will get permission denied errors.
-d runs the container as a daemon
-p 8081:80 port bindings.  the host ubuntu machine will forward port 8081 to the containers port 80.
--restart=unless-stopped if the docker container dies for any reason, docker will attempt to restart it, unless a person stopped it manually using `docker stop [name]`

Source Code

I created a BitBucket repo that the design team could check code into.  I went with bitbucket b/c they have nice free private plans.

CI Tool

I had Jenkins running already for other projects so I just added a new project.  On BitBucket checkins to the repo I created, Jenkins would pull down the code and build it.  Since everything was static and it's a prototype so I don't really care about code quality yet, my build doesn't really do anything.  But what's important is that the Jenkins project has an scp step that scp's the code to my host ubuntu server.  And it scp's all the code to /usr/local/code.


So to recap:
1.  Design team checks in code
2.  Jenkins pulls down latest and scp's it to ubuntu:/usr/local/code
3.  Nginx Docker container has /usr/local/code mounted correctly and will serve everything in that dir to http://ubuntu:8081

The major wins for me here was that to download and setup nginx was very easy.  And the deploy process was just as easy.  And of course it happens on every checkin so I can see the latest whenever they push.

So Much More

Docker can do so much more than what I've put here.  On my other projects, as part of my build process, I actually have Jenkins create Docker images that I check into DockerHub.  I can then pull them from anywhere and run them; be it another developers laptop, or even production.  And on every machine, it will run identically.   And Docker just added Docker Cloud to make it even easier to deploy your docker images to a cloud like AWS, MS Azure or DigitalOcean.  So if you haven't played with Docker yet, I really recommend doing so.  And getting started is probably going to be a lot easier than you think it would be.